OMNIScope two channels oscilloscope, function generator and UART to USB converter

£22.00

  • 2 Channels Oscilloscope
  • 1 Channel Function Generator
  • Power Supply 5v, 3.3V, -5V
  • Serial to USB converter

Description

OMNIScope is a two channels oscilloscope, single channel function generator and USB to Serial converter

It works on Windows, Linux & Raspberry Pi

  • 2Channels Oscilloscope
  • 1 Channel Function Generator
  • Power Supply 5v, 3.3V, -5V
  • Serial to USB converter

OSCILLOSCOPE:

  • 2 Channels
    Two channels -16.5V ÷ 16.5V
    18MSPS max real real sampling rate
  • Support of 12, 8 and 6 bits resolution.
    12bits mode: sample rates are: single channel 5.14MSPS,  two channels: 5.14MSPS per channel (total 10.28MSPS),
    8bits mode: sample rates are: single channel 7.2MSPS, two channels: 7.2MSPS per channel (total 14.4MSPS),
    6bits mode: only single channel superfast mode 18MSPS
  • Fast mode (8bits resolution) – 14.4MSPS
  • Super Fast mode (6bits resolution) – 18MSPS
  • 6MHz analog bandwidth
  • XY – display mode
  • FFT  Spectrum Analyser
  • 32KB Samples memory (16K 12bits samples)
  • Hardware & software triggers
  • HOLD – display freeze
  • Single shot trigger mode
  • 4 Ranges ±300mV, ±1V, ±5v, ±16.5V
  • Timebase 0.2µs – 500s / division
  • DC/AC Coupling
  • USB  mode

 

Function Generator:

  • 1 Channel
  • 12 bits resolution
  • up to 5MSPS (depending on the output circuit)
  • 8 predefined waveforms
  • Built-in math equation functions
  • Waveform summing and combining capability

Power supply:

  • 3 voltages
  • 5V, 3.3V, 2.5V, 1.8V & -5V
  • 100mA / 100mA positive negative
  • Direct breadboard connection

Serial to USB Converter:

  • 3.3V,   5V tolerant
  • Speed up to 1MBPS
  • Any serial terminal software supported
  • Built in Terminal
  • No separate dongle needed anymore

 

Multimedia:

Additional information

Weight .1 kg
Dimensions 10 x 7.5 x 1 cm