OMNIBOARD – Oscilloscope, Generator, Power Supply, Virtual COM Port, RLC Meter, Serial Host Device

£35.00

Preorder product. Regular price £45.00

  • 4 Channels Oscilloscope
  • 2 Channels Function Generator
  • Power Supply 5v, 3.3V, 2.5V, 1.8V, -5V
  • Serial to USB converter
  • ARM Cortex programmer and debugger
  • AVR ISP Programmer
  • I2C Host device
  • USART Host device
  • SPI Host device
  • RLC Meter
  • Frequency Meter
  • Diodes & Transistors Tester
  • 8x GPIO (+PWM) to USB Converter
  • USB or standalone mode

Delivery: the preodered Omniboards will be send on 17 of September 2018

Description

OMNIBOARD is a complete electronics maker workbench (14 in 1) multifunctional device which accommodates on board:

  • 4 Channels Oscilloscope
  • 2 Channels Function Generator
  • Power Supply 5v, 3.3V, 2.5V, 1.8V, -5V
  • Serial to USB converter
  • ARM Cortex programmer and debugger
  • AVR ISP Programmer
  • I2C Host device
  • USART Host device
  • SPI Host device
  • RLC Meter
  • Frequency Meter
  • Diodes & Transistors Tester
  • 8x GPIO (+PWM) to USB Converter
  • USB or standalone mode

OSCILLOSCOPE:

  • 4 Channels
    Two channels -16.5V ÷ 16.5V
    Two Channnels 0 ÷ 3.3V
  • 18MSPS max real real sampling rate
  • Support of 12, 8 and 6 bits resolution.
    12bits mode: sample rates are: single channel 5.14MSPS,  two channels: 5.14MSPS per channel (total 10.28MSPS), three channels 4.0MSPS / channel (total 12MSPS), four channels 3.6MSPS / channel (total of 14.4MSPS)
    8bits mode: sample rates are: single channel 7.2MSPS, two channels: 7.2MSPS per channel (total 14.4MSPS), three channels 4.5MSPS / channel (total of 13.5MSPS), four channels 4.0MSPS / channel (total of 16MSPS)
    6bits mode: only single channel superfast mode 18MSPS
  • Fast mode (8bits resolution) – 14.4MSPS
  • Super Fast mode (6bits resolution) – 18MSPS
  • 6MHz analog bandwidth
  • XY – display mode
  • FFT  Spectrum Analyser
  • 64KB Samples memory (32K 12bits samples)
  • Hardware & software triggers
  • HOLD – display freeze
  • Single shot trigger mode
  • 4 Ranges ±300mV, ±1V, ±5v, ±16.5V
  • Timebase 0.2µs – 500s / division
  • DC/AC/GND Coupling
  • 8MHz clock source
  • USB  or Standalone mode

Function Generator:

  • 2 Channels
  • 12 bits resolution
  • up to 5MSPS (depending on the output circuit)
  • 8 predefined waveforms
  • Built-in math equation functions
  • Waveform summing and combining capability
  • WAV files play
  • Oscilloscope saved waveforms replay
  • Freehand draw mode (from the next version)

 

Power supply:

  • 5 voltages
  • 5V, 3.3V, 2.5V, 1.8V & -5V
  • 800mA total. 100mA negative
  • Direct breadboard connection

Serial to USB Converter:

  • 3.3V,   5V tolerant
  • Speed up to 1MBPS
  • Any serial terminal software supported
  • Built in Terminal
  • No separate dongle needed anymore

 

ARM Cortex debugger and programmer:
AVR uC ISP programmer:

  • ARM Cortex debugger and programmer
  • CMSIS-DAP compatible

 

  • AVR ISP programmer
  • Avrdude compatible

I2C Host Device:
SPI Host Device:
USART Host device:

  • Program and debug serial peripherals
  • Easy to use scripting language
  • Instant result display
  • Advanced bus diagnostics
  • Scripts can saved and loaded
  • Non volatile memories programming

8x GPIO to USB converter:

  • 8x 3.3V GPIO
  • Read and write the GPIO using the USB
  • PWM signal generation
  • GPIOs available on the extension port

RLC Meter:

  • Requires add on card
  • Resistance, Capacitance and Inductance meter
  • Frequency meter (digital and analog signals)

 

Some soldering is required. All SMT parts are soldered, THT parts and headers needs to be soldered.

TFT Display not included . The standard Arduino TFT display is required to use Omniboard in the  standalone mode. SD7783, ILI9320 and ILI9325. Other chips will be added in the next firmware versions.

Multimedia:

Additional information

Weight .1 kg
Dimensions 10 x 7.5 x 1 cm